Starting a Nissan Rogue with a Manual Key

Introduction

The Nissan Rogue is a popular mid-sized crossover SUV that has been around since 2007. It typically comes with an automatic transmission, but some models also have a manual transmission. Starting the engine of a manual transmission vehicle requires a manual key ignition system. This article will provide step-by-step instructions on how to start a Nissan Rogue with a manual key.

Insert the Key Into the Ignition

The first step in starting your Nissan Rogue with a manual key is to insert the key into the ignition. To do this, locate the ignition switch near the steering wheel. Insert the key into the ignition, making sure it is firmly in place and not wiggling or loose. Make sure the key is facing the right direction; if you are having trouble inserting the key, try turning it slightly in either direction until it slides into the ignition.

Press the Clutch and Brake Pedals

Once the key is in the ignition, you must press the clutch and brake pedals simultaneously. This is important because the clutch pedal is used to engage the gears and the brake pedal is used to stop the vehicle. If you don’t press both pedals together, you won’t be able to start the engine.

Turn the Key

Once the key is inserted into the ignition and the clutch and brake pedals are pressed, you can turn the key further clockwise. Keep turning the key until the engine starts. You may hear a clicking sound before the engine starts, which is normal.

Release the Key

Once the engine has started, you can release the key from the ignition. Make sure you don’t pull the key out too quickly as this could damage the ignition system. Instead, slowly pull the key out of the ignition while the engine is running.

Put the Gearshift in Neutral

Before driving the vehicle, it is important to put the gearshift in neutral. This is done by moving the gearshift lever to the center position. This will ensure that the vehicle is not in any gear and will allow you to drive smoothly.

Drive Carefully

Now that the vehicle is running, it is important to be aware of your surroundings and drive carefully. Be sure to obey all traffic laws and pay attention to other drivers on the road. Driving safely is the best way to ensure everyone’s safety.

Conclusion

Starting a Nissan Rogue with a manual key ignition system is a relatively straightforward process. The steps involved are inserting the key into the ignition, pressing the clutch and brake pedals, turning the key, releasing the key, putting the gearshift in neutral, and driving carefully. Following these steps should help you successfully start your Nissan Rogue.