Introduction
Starting a fire is an essential part of successfully escaping from prison in Prison Architect Escape Mode. Knowing how to properly build and maintain a fire can help you stay warm and provide you with light while you are on the run. In this article we will discuss the necessary steps for starting a fire in Prison Architect Escape Mode.
What is Prison Architect Escape Mode?
Prison Architect Escape Mode is an online game where players are tasked with breaking out of a simulated prison. Players must collect items, craft tools, and find a way to break out without being caught by guards. Once they have escaped, they must make their way through the wilderness, avoiding danger and looking for places to hide and rest.
Why Starting a Fire is Necessary
Starting a fire is important when playing Prison Architect Escape Mode because it provides warmth and light. Without a fire, players will be exposed to the elements and unable to see in the dark. Additionally, a fire can be used to cook food and boil water, which can help keep them nourished and healthy during their journey.
Gather Supplies
Before you can start a fire, you need to gather the necessary supplies. The most important items are tinder, kindling, and fuel. Tinder is small, dry materials that will ignite easily and burn quickly. Kindling is larger pieces of wood that will catch fire more slowly than tinder. Fuel is the largest material that will provide long-lasting heat and light.
What Items to Collect
When gathering supplies, you should look for dry leaves, grass, twigs, paper, and cardboard. These items will work as tinder. For kindling, you should look for small branches and sticks. Finally, for fuel, you should look for larger logs and pieces of wood. You may also want to collect stones or rocks to form a circle around your fire pit.
Where to Find the Supplies
The best place to find these supplies is outside the prison walls. Look for areas with dry vegetation such as fields and forests. Make sure to stay away from moist areas such as riverbanks and marshes. If you are unable to find enough supplies outdoors, you can also search inside the prison for discarded materials such as cardboard boxes and newspapers.
Make a Fire Pit
Once you have gathered the necessary supplies, you need to create a fire pit. A fire pit is a shallow hole in the ground that will contain the fire and protect it from spreading. To construct a fire pit, first dig a shallow hole in the ground that is at least one foot wide and one foot deep. Then, line the sides and bottom of the hole with stones or rocks to prevent the fire from spreading.
Selecting a Safe Location
When selecting a location for your fire pit, choose a spot that is away from flammable objects such as trees and brush. It should also be in an area that is not prone to flooding or high winds. Make sure to select a spot that is far enough away from the prison walls so that the guards cannot see the smoke.
Build a Tower of Kindling
Next, you need to construct a tower of kindling. To do this, arrange the smaller sticks and branches in a tepee shape over the fire pit. Make sure the kindling is arranged tightly so that air can circulate and spark the fire. Leave an opening at the top of the tower so that you can light it easily.
What Materials to Use
The best materials to use for kindling are dry sticks and branches. If you are unable to find any, you can also use cardboard or paper. Try to avoid using green wood since it will not burn easily.
Arranging the Kindling
When arranging the kindling, start by placing the small pieces at the base of the tower. As you work your way up, add larger pieces of kindling until you reach the top. Make sure the kindling is packed tightly so that air can circulate and spark the fire.
Use a Lighter or Matches
Once the kindling is arranged, it is time to light the fire. To do this, use a lighter or matches. Place the flame at the base of the kindling tower and gently blow on it until the kindling catches fire. Be careful not to blow too hard or the fire could go out.
Safety Precautions
When using a lighter or matches, always practice safety precautions. Do not leave the lighter or matches unattended and always keep them away from flammable materials. Also, make sure that the fire is completely extinguished before leaving the area.
Igniting the Kindling
Once the kindling is lit, the fire will begin to spread. You can help it along by adding more tinder and kindling to the fire. Make sure to add the tinder and kindling gradually so that the fire does not get too big or out of control.
Add Fuel
Once the fire is burning steadily, it is time to add fuel. Fuel is the largest material that will provide long-lasting heat and light. The best type of fuel to use is dry logs and branches. Add the fuel gradually so that the fire does not get too large or out of control.
What Type of Fuel to Use
When selecting fuel, look for dry logs and branches. Avoid using green wood since it will not burn easily. If you are unable to find any dry logs or branches, you can also use cardboard or paper.
How to Add Fuel to the Fire
To add fuel to the fire, place it on top of the existing kindling and tinder. Make sure the fuel is arranged loosely so that air can circulate and spark the fire. Once the fuel is added, the fire should become larger and burn for a longer period of time.
Tend the Fire
Finally, you need to tend the fire to keep it burning steadily. To do this, monitor the fire regularly and adjust the size and intensity as needed. If the fire gets too large, add more fuel and move some of the burning logs away from the flames. If the fire starts to die down, add more tinder and kindling to reignite it.
Monitoring the Fire
Monitoring the fire is important to ensure that it does not get too large or out of control. Check the fire every few minutes to make sure it is burning steadily. If it starts to get too big or out of control, add more fuel or move some of the burning logs away from the flames.
Adjusting the Size and Intensity
If the fire gets too large, you can reduce its size and intensity by adding more fuel or moving some of the burning logs away from the flames. If the fire starts to die down, add more tinder and kindling to reignite it.
Conclusion
Starting a fire in Prison Architect Escape Mode is an essential part of successfully escaping from prison. Knowing how to properly build and maintain a fire can help you stay warm and provide you with light while you are on the run. This article has discussed the necessary steps for starting a fire in Prison Architect Escape Mode, including gathering supplies, constructing a fire pit, building a tower of kindling, using a lighter or matches, adding fuel, and tending the fire.
(Note: Is this article not meeting your expectations? Do you have knowledge or insights to share? Unlock new opportunities and expand your reach by joining our authors team. Click Registration to join us and share your expertise with our readers.)