How to Make a Fitted Hat Smaller: 8 Simple Methods Explained

Introduction

A fitted hat is a type of headgear that is designed to fit snugly on the head. It is usually made from a lightweight material such as cotton or wool, and can be worn for both fashion and practical purposes. If you have bought a fitted hat that is too large for your head, then you may need to make it smaller.

There are several different ways to do this, so it is important to choose the method that is most suitable for the type of hat you have. In this article, we will look at eight different methods for making a fitted hat smaller, and discuss the pros and cons of each one.

Use a Hair Dryer

One of the simplest ways to make a fitted hat smaller is to use a hair dryer. To do this, simply put the hat on your head and then turn the hair dryer on low heat. Move the hair dryer around the hat, making sure to keep it a few inches away from the fabric. The heat from the hair dryer will cause the fabric to shrink slightly, which should make the hat fit more snugly on your head.

The advantage of this method is that it is quick and easy to do. However, it is important to note that the heat from the hair dryer can damage some fabrics, so it is best to test it on a small area first before using it on the entire hat.

Sew Additional Material Inside the Hat

Another way to make a fitted hat smaller is to sew additional material inside the hat. This can be done by taking a piece of cotton or other lightweight fabric and cutting it into a circle that is slightly smaller than the circumference of the hat. Then, place the circle inside the hat and sew it in place. This will create a tighter fit for the hat and make it smaller.

The advantage of this method is that it is relatively easy to do and can be used on any type of hat. However, it does require some sewing skills, so it may not be suitable for everyone.

Use an Elastic Band

Another simple way to make a fitted hat smaller is to use an elastic band. To do this, take an elastic band that is slightly smaller than the circumference of the hat and tie it around the brim. This will create a tighter fit and make the hat smaller. The advantage of this method is that it is very quick and easy to do.

However, it is important to note that the elastic band can cause the fabric of the hat to stretch over time, so this method is best used on hats that are only slightly too big.

Use Heat Shrink Fabric

Heat shrink fabric is a special type of fabric that shrinks when exposed to heat. It is commonly used for making items such as hats and gloves smaller. To use heat shrink fabric for making a fitted hat smaller, simply cut a piece of the fabric to the size of the hat and sew it inside. Then, use a hair dryer to apply heat to the fabric, which will cause it to shrink and make the hat smaller.

The advantage of this method is that it is relatively easy to do and can be used on any type of hat. The disadvantage is that it requires some sewing skills and can be time consuming.

Pull on the Hat

If the hat is only slightly too large, then you may be able to make it smaller by simply pulling on it. To do this, simply put the hat on your head and then pull on either side of the brim. This will create a slight tension that should make the hat fit more snugly on your head.

The advantage of this method is that it is very quick and easy to do. However, it is important to note that it may not work on all types of hats, and it can also cause the fabric to stretch over time.

Put the Hat in Hot Water

In some cases, you may be able to make a fitted hat smaller by putting it in hot water. To do this, fill a bowl or sink with hot water and then submerge the hat in the water. Leave it in the water for a few minutes, then take it out and let it air dry. This should cause the fabric to shrink slightly, which should make the hat fit more snugly on your head.

The advantage of this method is that it is relatively easy to do. However, it is important to note that the heat from the water can damage some fabrics, so it is best to test it on a small area first before using it on the entire hat.

Use a Hat Reducer Insert

Hat reducer inserts are special pieces of foam or plastic that can be inserted into the crown of a hat to make it smaller. To use one, simply insert the insert into the crown of the hat and adjust it until the hat fits snugly on your head. The advantage of this method is that it is very easy to do and can be used on any type of hat.

However, it is important to note that the insert can cause the fabric of the hat to stretch over time, so this method is best used on hats that are only slightly too big.

Conclusion

Making a fitted hat smaller can be a tricky task, but it is possible if you choose the right method. In this article, we have looked at eight different methods for making a fitted hat smaller, including using a hair dryer, sewing additional material inside the hat, using an elastic band, using heat shrink fabric, pulling on the hat, putting the hat in hot water, and using a hat reducer insert. Each of these methods has its own advantages and disadvantages, so it is important to choose the one that is most suitable for the type of hat you have.